A100 Series Components

The A100 components are available in 4 colours from stock . All profiles are fully colour coordinated to ensure the finished product has a high aesthetic value.

In addition to supplying the full range of steel components, and associated accessories, required for the manufacture of sliding doors, we also offer the specialist tools required to fabricate the doors.



Item

     

Description

      

Dimension

       

Box quantity

A101 stile 

 

Asymetical profile with a curved front edge to act as the finger pull. Provides for clean lines and a contemporary feel.

Designed in a 10mm option, glass panels require a rubber gasket and 8mm MFC panels require a plastic packing .

Side stiles for the A100 series are drilled at both ends using a two stage drill bit and jig to accept the assembly and adjustment screws.

Each door requires 1 stile.

   L: 5200mm
W: 34mm
H: 26mm
  10
             

A102 stile

 

Symetrical positioned profile with strong vertical accent lines and indentation finger pull. This is the most popular of the aluminum profiles.

Each door requires 1 stile.


   L: 5200mm
W: 34mm
H: 34mm
  10
             

A103 stile

  

Fully symmetrical profile specifically designed for room division applications. An exaggerated indentation to both front and back provided easy operation form both sides of the door.

Each door requires 1 stile.

   L: 5200mm
W: 34mm
H: 35mm
  8
             

Top rail

  

The A100 top rail fits on the top of the sliding wardrobe door.

This component has an internal void to accept the assembly screw.

Each doorup to 1000mm wide requires 0.2 rail 		  L: 5000mm
W: 20mm
H: 18mm
  20
             

Bottom Rail

 

The A100 bottom rail fits on the top of the sliding wardrobe door.

This component has an internal void to accept the assembly screw. Additionally the bottom rail have a void to accept the bottom roller mechanism

Each doorup to 1000mm wide requires 0.2 rail

   L: 5000mm
W: 18mm
H: 53mm
  10
             

Universal connector H bar

   The A100 Universal connector H bar is used to create split panel doors.

The A100 version has fluted detail to the front face and a flat finish to the back face allowing for different styles of door to be made from the same component.
   L: 5000mm
W:13 mm
H: 23mm
   20
             

Top track

  

The A100 top track is E shaped and attached to the top of the wardrobe framing assembly. There are two channels for the doors to run in.

As the doors are bottom rolling this component serves to stablise the doors.

Universal and colour coordinated, this component in is required for all A100 sliding wardrobe door installations

Single top track is also available

  L: 5000mm
W: 80mm
H: 44mm
  6
             

Bottom Track

  

The A100 bottom track accepts the bottom rollers of the doors in the wardrobe framing assembly. There are two channels for the doors to run in.

As the doors are bottom rolling this component should be installed on a flat and level load bearing surface.

Universal and colour coordinated, this component in is required for all A100 sliding wardrobe door installations

Single bottom track is also available.

  L: 5000mm
W: 64mm
H: 8mm
  12
             

Roller Pack

 

The roller pack contains two  twin ball bearing top guides and two ball bearing bottom rollers inclusive of assembly and adjustment screws for the a100 door 

The guides use Abec 5 bearings and rubber coated to roll smoothly within the top track channels.

The wheel uses an Abec 5 bearing and is chamfered to roll smoothly within the bottom track channels.

The A100 bottom roller is spring mounted in the bottom rail assembly of the door, preventing the doors from leaving the track.

All A100 bottom rollers are weight rated to 50kg.

Each door requires one roller pack 

   N/A
   100
             

Angle channel and guide


  

The angle channel and guide assembly allows angled door to run with little to no engagement in the top track.

The angle channel is fixed to an 18mm internal shelf - preferably 100mm below the start of the angle and twice the width of the finished door.

The angle guide then engages in this channel supporting the outer edge of the door.

  N/A
   1
             

Aluminium Gasket

   Aluminium Gasket is applied to all glass panels used in the construction of the A100 series sliding doors.

Available in two sizes for both 4mm and 6mm glass.
   N/A
   4mm
190m roll

6mm
100mm roll
             

Brush strip

   Brush strip is applied to the sides of the doors to minimse impact when the door and wall come into contact.

Dense pile self adhesive and available in grey only.
  N/A
   225M
             

Assembly hole plugs

   Opaque plastic plugs for the assembly holes on the aluminium system.
  N/A
   100
             

Bottom positioners

   Metal clip spring to insert in the bottom track to prevent the doors rolling.
Suitable for use when the doors are installed on a slightly uneven surface.
   N/A
   100
             

Soft close mechanism

  

The soft close mechanism similar to that found on soft close draws, prevents to the door slamming and closes it gently.

A top track peg is supplied to be fitted in the top track channel according to the enclosed instructions .

   N/A
   Boxes of 4
Cartons of 100
             

Drill Jig and step drill

   The drill jig and step drill allows for accurate positioning and machining of the assembly holes required for the A100 series. 


 
   N/A
   1